Dronetag DRI module enables manufacturers to easily integrate direct / broadcast remote identification into new drone models. Compliant with EU & US standards and regulations.
New regulations in EU & US regions mandate manufacturers to equip their new drone models with technology for Direct / Broadcast remote identification (RID). Dronetag DRI is the easiest way to acquire RID technology without years of R&D and product testing. Connect our factory-ready modules to your drone’s flight controller. That’s all it takes.
Flexible Mounting
Dronetag DRI is a small single-sided board, so you can either use double-sided tape or M2 screws to mount it in the desired place.
Device Management via Mobile App
Forgot about disassembling your aircraft to change the settings or update the firmware. Take care of everything in our multiplatform mobile app.
OTA Firmware Updates
Guarantees long-term support and future-proof solutions. New exciting features are always waiting at your fingertips.
No Sensors & Battery
Module takes position data and power from your FC. Minimal impact on drones’ SWAP characteristics as the DRI module weighs 1.5 g with a size of 22.5 × 16 mm.
Comes with Standardized SN
Our DRI module already has ANSI/CTA-2063-A serial number baked inside. Refer to this SN during the compliance process without worries about managing your sequence.
ASD-STAN EN 4709-002 & ASTM F3411-22 compliant
Suitable for all regions adopting any of those standards. Broadcast over Bluetooth 4 & 5 to up to 3 km range (distance drone to smartphone).
Upload Flight Logs Online
Dronetag DRI has external flash memory, which allows pilots to synchronize their flights with Dronetag App.
Download Pixhawk Dataflash Logs
Troubleshooting customer‘s problem over a long distance? Let them wirelessly download diagnostic dataflash logs and send them to you for inspection.
